Shop All

ON-OFF actuator. Normally used with Proof of Closure V5055/V5907C valve bodies. Low pressure.Overview:Use in combination with V5055 or V5097 Gas Valves to control gas supply to commercial and industrial burners.Features: Use where smooth light...

RSE II A Coil Kit

Used for pneumatic proportional control of variable volume terminal units and small damper. Available in various operating ranges for either individual or sequence operation with other actuators. Replacement devices are available for Johnson, Powers,...

The Series 72 Modutrol IV Motors spring return and non-spring return motors are used to control dampers and valves. The motors accept a current or voltage signal from an electronic controller to position a damper or valve at any point between open and...

24/120/230 Vac Internal Transformers for Series 2 Motors Control Signal: SPST, On/Off switch Includes: Transformer, screws, instructions for mounting internally in Modutrol IV Series 2 motors Used With: Series 2 Modutrol IV Motors

Features Includes pilot burner with bracket, ceramic-insulated flame rod/spark igniter and ground strap. Single tip style. Specifications Used with the S86, S860, S8610, or S8670 in intermittent pilot systems. Description: Pilot Burner for...

30" Ignition Cable Assembly with a right angle boot for ignition terminal and 1/4" straight quick connect at module end for S8600 family. Used with : S8600 Series Type: Cable

TR21-WS and TR23-WS sensors are a family of wireless wall modules. All models report space temperature; TR23 models come with setpoint adjustment and override. Features: Wall module to Receiver (point to point) wireless kits can replace any standard...

The C7041 Electronic Temperature Sensors are designed to be used with electronic controllers in domestic or commercial heating and cooling systems. Features The C7041 series of electronic temperature sensors are designed for use with the Excel 10,...

ML7420 and ML7425 series provide 0/2...10Vdc control of 20mm stroke control valves; ML8824 has universal control signal of 0/2...10Vdc, 4...20mA, and 3-P floating control. ML7420 and ML8824 are standard, and ML7425 offers spring return safety function...

Description The BACnet Fixed Function Thermostat (BACnet FF) is a configurable device with 19 factory-loaded applications for specific and common projects including fan coil, heat pump and roof top equipment control. It communicates of BACnet MS/TP and...

For control of high limit and fan motor in all types of forced air heating systems.Features Three wiring terminal options available for easy installation: Push-in receptacles for stripped wire. Female receptacles for 1/4 in. male flag connectors...